04-25-2021, 05:04 AM
Hi Pedro,
The mini-i pro 3 cannot replace a phono pre-amp. If the turtable only has a phono output without a lineout, it would not work with mini-i Pro 3 properly. Because the output amplitude is too low.
You can find the option Line-in Gain in settings menu of mini-i Pro 3, the input amplitude should not much lower than 1Vrms. To connecting to the analogue source which outputs amplitude is about 1Vrms, you can set the linein gain to +6dB. If the signal is much lower than 1Vrms, the +6dB would also not enough for you.
Regards.
The mini-i pro 3 cannot replace a phono pre-amp. If the turtable only has a phono output without a lineout, it would not work with mini-i Pro 3 properly. Because the output amplitude is too low.
You can find the option Line-in Gain in settings menu of mini-i Pro 3, the input amplitude should not much lower than 1Vrms. To connecting to the analogue source which outputs amplitude is about 1Vrms, you can set the linein gain to +6dB. If the signal is much lower than 1Vrms, the +6dB would also not enough for you.
Regards.
