04-25-2024, 05:46 PM
Hello Lihui,
Yes, it works with a USB-adapter.
The Second problem is not solved
and it will make the difference weather I chose to buy the Element S or not (I have borrowed it from a dealer). All he other connections works: Coax, AES, Optical, with sound. All the setup settings Wai Cao recommended for the DAC: Topping D90SE are followed and I have removed pin no, 16 from a HDMI cable, but no sound on IIS port! To be specific I have removed the pin in the cable that meets the pin no. 16 in the streamer AND the DAC just as shown on the photo from Wai Cao. In IIS mode on the DAC there are info about KHz, same as for AES, Optical or Coax ! Some info must pass through from Streamer to DAC on the IIS port.
What about the device configuration in the Element S with regard to DAC: Topping D90SE ?
As it is now:
IIS-LVDS Port Definition : Type A,
DSD output format from IIS LVDS port : Native
MCLK mode from IIS LVDS port : Mode A
Please, Do you have any suggestions ?
Regards
Lars
Yes, it works with a USB-adapter.
The Second problem is not solved
and it will make the difference weather I chose to buy the Element S or not (I have borrowed it from a dealer). All he other connections works: Coax, AES, Optical, with sound. All the setup settings Wai Cao recommended for the DAC: Topping D90SE are followed and I have removed pin no, 16 from a HDMI cable, but no sound on IIS port! To be specific I have removed the pin in the cable that meets the pin no. 16 in the streamer AND the DAC just as shown on the photo from Wai Cao. In IIS mode on the DAC there are info about KHz, same as for AES, Optical or Coax ! Some info must pass through from Streamer to DAC on the IIS port.What about the device configuration in the Element S with regard to DAC: Topping D90SE ?
As it is now:
IIS-LVDS Port Definition : Type A,
DSD output format from IIS LVDS port : Native
MCLK mode from IIS LVDS port : Mode A
Please, Do you have any suggestions ?
Regards
Lars
