01-30-2023, 09:54 AM
(01-30-2023, 04:37 AM)Wei Cao 提到: Hi Tore_2388,OK Cao, many thanks for helping.
When you use Matrix X-SPDIF3 work with Topping D90SE, please follow the settings below:
1. IIS definition of X-SPDIF3 select Type B.
2. In Topping D90SE's settings, IIS Phase=STD, IIS DSDR=DATA, DSD Flag=15
3. Use a standard definition HDMI cable, but you need to disconnect the 16th pin. Please refer to the picture below.
NOTE: Don't try to modify the socket on the X-SPDIF3 or D90SE, only modify the corresponding pin or wire of the HDMI cable.
But when i look in the X-SPDIF3 manual it looks like you are pointing on 4th pin, not 16th pin?
Tore