06-17-2022, 01:53 PM
Hi,
I do poses 2 charger models: iFi iPowerX and iFi iPower2.
Both are 5.5×2.1mm, (-) outside, (+) inside. As shown in the enclosed pic.
However, iFi has 4 variants for iPowerX: 5V/3.0A, 9V/2.5A, 12V/2.0A, 15V/1.5A. And 4 variants for iPower2: 5V/2.5A, 9V/2.0A, 12V/1.8A, 15V/1.2A.
My variant are 5V/3.0A for iPowerX and 5V/2.5A for iPower2.
If you can make sure that this voltage are the only cause the non identified of the DIABLO and Gryphone (despite both are battery based), then I'm willing to consider one of those solutions: Purchase new iFi iPowerX 12V/2.0A, or iPowerX 9V/2.5A, or sent to lab and connect to SATA power.
Will this solve the identification? Do you suggest the 12V/2.0A or the 9V/2.5A?
Avi
I do poses 2 charger models: iFi iPowerX and iFi iPower2.
Both are 5.5×2.1mm, (-) outside, (+) inside. As shown in the enclosed pic.
However, iFi has 4 variants for iPowerX: 5V/3.0A, 9V/2.5A, 12V/2.0A, 15V/1.5A. And 4 variants for iPower2: 5V/2.5A, 9V/2.0A, 12V/1.8A, 15V/1.2A.
My variant are 5V/3.0A for iPowerX and 5V/2.5A for iPower2.
If you can make sure that this voltage are the only cause the non identified of the DIABLO and Gryphone (despite both are battery based), then I'm willing to consider one of those solutions: Purchase new iFi iPowerX 12V/2.0A, or iPowerX 9V/2.5A, or sent to lab and connect to SATA power.
Will this solve the identification? Do you suggest the 12V/2.0A or the 9V/2.5A?
Avi
