(01-30-2023, 03:41 PM)tore_2388 提到:(01-30-2023, 09:54 AM)tore_2388 提到:(01-30-2023, 04:37 AM)Wei Cao 提到: Hi Tore_2388,
When you use Matrix X-SPDIF3 work with Topping D90SE, please follow the settings below:
1. IIS definition of X-SPDIF3 select Type B.
2. In Topping D90SE's settings, IIS Phase=STD, IIS DSDR=DATA, DSD Flag=15
3. Use a standard definition HDMI cable, but you need to disconnect the 16th pin. Please refer to the picture below.
NOTE: Don't try to modify the socket on the X-SPDIF3 or D90SE, only modify the corresponding pin or wire of the HDMI cable.
Hi Wei,
i have done all you told me to do but it is no difference. No sound :-(
PS! I can open the connectors on my hdmi cabel. I have de-solder the 16th pin in the Matrix end only
Tore
For your information: i had a Topping U90 DDC here, no problem playing with that one. The only problem with Topping U90 was that it could not play 768 kHZ, and it was not better than playing with usb direct to Topping D90SE.
Tore