(01-30-2023, 09:54 AM)tore_2388 提到:(01-30-2023, 04:37 AM)Wei Cao 提到: Hi Tore_2388,
When you use Matrix X-SPDIF3 work with Topping D90SE, please follow the settings below:
1. IIS definition of X-SPDIF3 select Type B.
2. In Topping D90SE's settings, IIS Phase=STD, IIS DSDR=DATA, DSD Flag=15
3. Use a standard definition HDMI cable, but you need to disconnect the 16th pin. Please refer to the picture below.
NOTE: Don't try to modify the socket on the X-SPDIF3 or D90SE, only modify the corresponding pin or wire of the HDMI cable.
Hi Wei,
i have done all you told me to do but it is no difference. No sound :-(
PS! I can open the connectors on my hdmi cabel. I have de-solder the 16th pin in the Matrix end only
Tore
这个主题的帖子 |
Matrix X-SPDIF 3 - by tore_2388 - 01-29-2023, 11:19 AM
RE: Matrix X-SPDIF 3 - by Wei Cao - 01-30-2023, 04:37 AM
RE: Matrix X-SPDIF 3 - by tore_2388 - 01-30-2023, 09:54 AM
RE: Matrix X-SPDIF 3 - by tore_2388 - 01-30-2023, 03:41 PM
RE: Matrix X-SPDIF 3 - by tore_2388 - 01-30-2023, 10:22 PM
RE: Matrix X-SPDIF 3 - by Wei Cao - 02-01-2023, 12:58 AM
RE: Matrix X-SPDIF 3 - by tore_2388 - 02-01-2023, 11:12 AM
RE: Matrix X-SPDIF 3 - by Wei Cao - 02-02-2023, 04:50 AM
RE: Matrix X-SPDIF 3 - by Wei Cao - 02-01-2023, 01:05 AM
RE: Matrix X-SPDIF 3 - by Alessandro_3550 - 03-29-2024, 01:24 AM
RE: Matrix X-SPDIF 3 - by Wei Cao - 04-01-2024, 04:52 AM
RE: Matrix X-SPDIF 3 - by Alessandro_3550 - 04-10-2024, 11:52 AM
|
正在浏览该主题的用户: 1 个游客