01-30-2023, 04:37 AM
Hi Tore_2388,
When you use Matrix X-SPDIF3 work with Topping D90SE, please follow the settings below:
1. IIS definition of X-SPDIF3 select Type B.
2. In Topping D90SE's settings, IIS Phase=STD, IIS DSDR=DATA, DSD Flag=15
3. Use a standard definition HDMI cable, but you need to disconnect the 16th pin. Please refer to the picture below.
NOTE: Don't try to modify the socket on the X-SPDIF3 or D90SE, only modify the corresponding pin or wire of the HDMI cable.
When you use Matrix X-SPDIF3 work with Topping D90SE, please follow the settings below:
1. IIS definition of X-SPDIF3 select Type B.
2. In Topping D90SE's settings, IIS Phase=STD, IIS DSDR=DATA, DSD Flag=15
3. Use a standard definition HDMI cable, but you need to disconnect the 16th pin. Please refer to the picture below.
NOTE: Don't try to modify the socket on the X-SPDIF3 or D90SE, only modify the corresponding pin or wire of the HDMI cable.