帖子: 7
主题: 2
加入时间: Sep 2024
声望:
0
I’ve just preordered X-Spdif 3 at Magna HiFi distributor. When are expected availability of the first units? Just cant wait!
Aurender N100H > Innuos PhoenixUSB / Martix Audio X-Spdif 3 > Matrix X-Sabre PRO / Holo Audio Spring 3 KTE DAC > Simaudio Moon 600i > Diapason Adamantes III
帖子: 1,058
主题: 109
加入时间: Sep 2024
声望:
36
Hi Radoslav,
Thanks for reaching out.
Magna HiFi was talking to us for their order yesterday. I think you will not wait very long time.
Best regards.
帖子: 7
主题: 2
加入时间: Sep 2024
声望:
0
(10-19-2022, 04:45 AM)Wei Cao 提到: Hi Radoslav,
Thanks for reaching out.
Magna HiFi was talking to us for their order yesterday. I think you will not wait very long time.
Best regards.
Good news. Thanks!
Aurender N100H > Innuos PhoenixUSB / Martix Audio X-Spdif 3 > Matrix X-Sabre PRO / Holo Audio Spring 3 KTE DAC > Simaudio Moon 600i > Diapason Adamantes III
帖子: 7
主题: 2
加入时间: Sep 2024
声望:
0
10-19-2022, 03:49 PM
(这个帖子最后修改于: 10-19-2022, 03:53 PM by Radoslav.)
Another question.
External power supply DC voltage for X-Spdif 3 is 12V, but not higher. What about lower voltage?
Will X-Spdif 3 work with 9V? Or is there any “working range” as for X-Spdif 2?
(For X-Spdif 2 there was 6-9V range and I was successfully using 6V external supply for my X-Spdif 2 unit)
Aurender N100H > Innuos PhoenixUSB / Martix Audio X-Spdif 3 > Matrix X-Sabre PRO / Holo Audio Spring 3 KTE DAC > Simaudio Moon 600i > Diapason Adamantes III
帖子: 1,058
主题: 109
加入时间: Sep 2024
声望:
36
Hi
Please use 12V power supply as suggested. :-)
帖子: 5
主题: 0
加入时间: Sep 2024
声望:
0
Hi Wei, i read that it can be powered by usb?
That means external power supply is optional?
Thanks.
帖子: 5
主题: 0
加入时间: Sep 2024
声望:
0
Hi again Wei, I have topping DX7 for now untill i buy X sabre 3... Using any other output than Hdmi on this interface gonna improve sound? What output would you recomend if i cant use hdmi?
Thanks again.
帖子: 1,058
主题: 109
加入时间: Sep 2024
声望:
36
Hi Arnas,
I think the X-SPDIF3 is better than the built-in USB interface of DX7, if the samplng rates of music source is not higher than 24-bit / 192kHz, you can use X-SPDIF3 with Dx7, use the toslink or coaxial cable connect the X-SPDIF3 and DX7, but sampling rates higher than 24/192 would not playable through this connection.
Best.
帖子: 7
主题: 2
加入时间: Sep 2024
声望:
0
11-11-2022, 03:37 PM
(这个帖子最后修改于: 11-11-2022, 05:53 PM by Radoslav.)
My X-Spdif 3 arrived!
Flawless plug and play action. Type A I2s pinout works perfectly with my Holo Spring 3 KTE dac.
Is there any recommended burn in period for X-Spfif 3 to settle down and work best?
Anyway, wery good sounding right away. Just first 30 min. listening...
Nice fit and finish as always. Very tight i2s HDMI socket is nice surprise!
Good job Mattix Audio!
Will post some findings and comparison after 1 - 2 weeks.
Aurender N100H > Innuos PhoenixUSB / Martix Audio X-Spdif 3 > Matrix X-Sabre PRO / Holo Audio Spring 3 KTE DAC > Simaudio Moon 600i > Diapason Adamantes III