Element H in NUC/mITX with use of M.2 to PCIe adaptor cable - 可打印的版本 +- Matrix Audio Community (https://www.matrix-digi.com/forums) +-- 版块: Main Discussion(主讨论区) (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1) +--- 版块: English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4) +--- 主题: Element H in NUC/mITX with use of M.2 to PCIe adaptor cable (/showthread.php?tid=323) |
Element H in NUC/mITX with use of M.2 to PCIe adaptor cable - Ong - 07-16-2022 Would like to have opinion of engineers / people who have tried. Is it possible/safe to run such adaptor cable on Element H? The configuration will be as below: - Element H running external power supply (9V) consistent - Intended to fit for intel NUC11TNHi3 / NUC11TNHi5 - Original M.2 22*42 B-key slot (which was labelled to be expandable for PCIe x1) - Intended to flash as Roon Rock / Daphille Another to be consider is - will Element H draw any current from the M.2 port when its set in external power supply mode? I am not sure whether the original description means it will cut off the 5V USB output, or the 9-12V input is actually directly supply current to Element H. RE: Element H in NUC/mITX with use of M.2 to PCIe adaptor cable - Wei Cao - 07-19-2022 Sorry, we only ensure the element H work with native PCIe port. |