Firmware

[Roberto_194]

Hi,

i want to know if there is some link to verify and download the last firmware of old products like matrix mini i pro 2.

Greetings

[Wei Cao]

Hi Roberto,
As I know, we have not released any firmware update for Matrix mini-i Pro 2.
Are you facing some problems about your mini-i Pro 2? Can I help you?

Best regards.

Wei.

[Roberto_194]

Hi Roberto,
As I know, we have not released any firmware update for Matrix mini-i Pro 2.
Are you facing some problems about your mini-i Pro 2? Can I help you?

Best regards.

Wei.

 Hi Wei Cao, Thanks for the response. I m trying to verify some things because, since i bought the DAC, i have had problems to play native DSD files. The screen show me PCM 44, 88, 182 when i play DSD files but, i' m really not shure if the problem is  the dac, the software Volumio or the raspberry 3pi that  i´m using.

Greetings.
Roberto.

[Wei Cao]

Hi Roberto,
If you would like to verify if your mini-i Pro 2 process DSD files in DSD Native method, you can connect the DAC to a PC over USB, use Foobar2000 (with ASIO and SACD components) and Matrix ASIO Driver.
Please refer to the instructions below:
https://www.matrix-digi.com/pdf/DSD_Conf...201805.pdf
Click the link below to install driver for Windows:
https://www.matrix-digi.com/drivers/Matr...Driver.zip

I'm not sure if Volumio could output native DSD over USB port.

[Roberto_194]

Hi Roberto,
If you would like to verify if your mini-i Pro 2 process DSD files in DSD Native method, you can connect the DAC to a PC over USB, use Foobar2000 (with ASIO and SACD components) and Matrix ASIO Driver.
Please refer to the instructions below:
https://www.matrix-digi.com/pdf/DSD_Conf...201805.pdf
Click the link below to install driver for Windows:
https://www.matrix-digi.com/drivers/Matr...Driver.zip

I'm not sure if Volumio could output native DSD over USB port.

Hi again Wei Cao,  finally the problem wasn't the matrix. Volumio had some compatibility problems with some DACs, I really don't understand so well but the problem now is fixed with the las update, now i can see asio native on the dac with no problems.
Thanks!!

[Jeremy_2440]

Hi, I hope you can help
I have bought a used mini-i pro 2 which looks great.  
After downloading the drivers I get a message from the Matrix Audio Control Panel "The driver DLL required to access the device is missing"
I use an HP Laptop running Windows 10.
Can you help and advise please

[Wei Cao]

Hi, I hope you can help
I have bought a used mini-i pro 2 which looks great.  
After downloading the drivers I get a message from the Matrix Audio Control Panel "The driver DLL required to access the device is missing"
I use an HP Laptop running Windows 10.
Can you help and advise please

 
Hi Jeremy,
Did you downloaded the latest driver software from Matrix website? The driver is compatible with Windows 10. Can you try again?
By the way, don't plug the mini-i Pro 2 to your PC before the driver is completely installed.
https://www.matrix-digi.com/drivers/Matr...Driver.zip

[Jeremy_2440]

Hi, I hope you can help
I have bought a used mini-i pro 2 which looks great.  
After downloading the drivers I get a message from the Matrix Audio Control Panel "The driver DLL required to access the device is missing"
I use an HP Laptop running Windows 10.
Can you help and advise please

 
Hi Jeremy,
Did you downloaded the latest driver software from Matrix website? The driver is compatible with Windows 10. Can you try again?
By the way, don't plug the mini-i Pro 2 to your PC before the driver is completely installed.
https://www.matrix-digi.com/drivers/Matr...Driver.zip

Hi,
Thank you - I had the mini-i plugged in.  Reinstalled drivers and everything is great.

[Wei Cao]

Hi,
Thank you - I had the mini-i plugged in.  Reinstalled drivers and everything is great.

Thanks for your update.