X-SPDIF 3 - USB bus power spec is 1000mA - 可打印的版本 +- Matrix Audio Community (https://www.matrix-digi.com/forums) +-- 版块: Main Discussion(主讨论区) (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1) +--- 版块: English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4) +--- 主题: X-SPDIF 3 - USB bus power spec is 1000mA (/showthread.php?tid=671) |
X-SPDIF 3 - USB bus power spec is 1000mA - john_3365 - 02-05-2024 Hi @LI HUI @Wei Cao On the Matrix website for X-SPDIF3 it says: "USB bus power supply: 5V/1000mA” That doesn’t make any sense. 1000mA is more than USB3 spec (900mA) And the X-SPDIF 3 USB port looks to be USB2.0 port (500mA) Can you please clarifiy and update the wesbite ? RE: X-SPDIF 3 - USB bus power spec is 1000mA - Wei Cao - 02-05-2024 Dear John, Thanks for your feedbacks. In actual implementation on most of the computers, the ability of USB power is higher than 500mA and 900m. A lot of USB devices requires higher than 5V/500mA power, but they actually comsume less power. For example, a USB CD drive usually declare it requires 5V/1.5A power, but it works flawlessly on a USB 2.0 port without external power supply. So does the X-SPDIF3, the X-SPIDIF3 will not consume so much power from the USB port actually. The following device is a CD drive from Lenovo, it works fine on a USB 2.0 port. [attachment=357] RE: X-SPDIF 3 - USB bus power spec is 1000mA - john_3365 - 02-05-2024 (02-05-2024, 01:48 AM)Wei Cao 提到: Dear John, Ok thanks Wei. So X-SPDIF 3 is confirmed to work perfectly ok with USB 2.0 port ? There is no requirement for USB 3.0 port or USB-PD port ? Is X-SPDIF 3 still in production ? I see many Matrix sellers showing out of stock for this product RE: X-SPDIF 3 - USB bus power spec is 1000mA - LI HUI - 02-05-2024 (02-05-2024, 01:56 AM)john_3365 提到: Ok thanks Wei.Yes, the X-SPDIF3 is still in production. I have not heard of any compatibility issue of the X-SPDIF3 with USB 2.0 and 3.0 ports, but I don't know if it is compatible with PD port. RE: X-SPDIF 3 - USB bus power spec is 1000mA - john_3365 - 02-05-2024 (02-05-2024, 02:04 AM)LI HUI 提到:(02-05-2024, 01:56 AM)john_3365 提到: Ok thanks Wei.Yes, the X-SPDIF3 is still in production. Ok thanks. My question is more about power requirement - USB 2.0 500mA is enough for X-SPDIF 3 to full function correctly ? We don't need to provide more power with USB 3 or USB-PD power ? RE: X-SPDIF 3 - USB bus power spec is 1000mA - LI HUI - 02-05-2024 (02-05-2024, 02:06 AM)john_3365 提到:Yes the X-SPDIF3 works flawlessly on a USB 2.0 port.(02-05-2024, 02:04 AM)LI HUI 提到:(02-05-2024, 01:56 AM)john_3365 提到: Ok thanks Wei.Yes, the X-SPDIF3 is still in production. RE: X-SPDIF 3 - USB bus power spec is 1000mA - john_3365 - 02-05-2024 Ok thanks LI Maybe the website should replace the 1000mA mentioned and just state USB 2.0 500mA port To avoid this confusion RE: X-SPDIF 3 - USB bus power spec is 1000mA - LI HUI - 02-05-2024 (02-05-2024, 02:11 AM)john_3365 提到: Ok thanks LIThanks for your suggestions. |