X-Sabre 3 No Network - 可打印的版本 +- Matrix Audio Community (https://www.matrix-digi.com/forums) +-- 版块: Main Discussion(主讨论区) (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1) +--- 版块: English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4) +--- 主题: X-Sabre 3 No Network (/showthread.php?tid=380) |
X-Sabre 3 No Network - Theodore - 12-29-2022 Firmware Version: v1.0.3 Build005 Release Date: Dec. 9th, 2022 Changelog: Hello, My X-Sabre 3 is connected by LAN to a router with DHCP. Roon Core is on Nucleus+ connected to same LAN. Roon finds and sets up the X-Sabre and it plays beautifully, displays cover art, bit-rate, etc. Occasionally, seemingly after going into standby, the X-Sabre wakes, but then says "No Network"..... and behaves oddly. Roon can still play music using the X-Sabre, but the display just says "No Network". If I try to adjust settings on the X-Sabre, the X-Sabre then flashes a speaker with an X in it, and then the Roon volume drops to zero. I have tried turning off standby, no good. I fix this by turning the power off to the X-Sabre. When it restarts, it works fine for a while, but eventually it loses the network again. Anyone else experience this? Ideas for fix? Is there a way to fully power off the unit other than just standby by using the touch screen or remote? I can only seem to put it in standby. Thank you, Ted RE: X-Sabre 3 No Network - Wei Cao - 12-30-2022 Hi Ted, Please check for update for your X-SABRE 3. The latest firmware fixes this issue. Thanks for you feedback. As long as you do not disconnect the power supply, the unit only goes to standby instead of shutdown completely. Please understand. RE: X-Sabre 3 No Network - Theodore - 12-30-2022 Thank you. Is the software I listed not the latest?: Firmware Version: v1.0.3 Build005 Release Date: Dec. 9th, 2022 This is what I have installed. RE: X-Sabre 3 No Network - Wei Cao - 01-03-2023 (12-30-2022, 01:26 AM)Theodore 提到: Thank you. Is the software I listed not the latest?: Hi Theodore, Yes, it's not the latest. The latest firmware version is v1.0.4 Build003. Please check for update. RE: X-Sabre 3 No Network - Theodore - 01-03-2023 This worked. Thank you RE: X-Sabre 3 No Network - Wei Cao - 01-04-2023 You are welcome. |