+- Matrix Audio Community (https://www.matrix-digi.com/forums)
+-- 版块： Main Discussion（主讨论区） (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1)
+--- 版块： English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4)
+--- 主题： Singxter u2 with Matrix Element X - (/showthread.php?tid=311)
Singxter u2 with Matrix Element X - - Joel_1297 - 06-13-2022
II2S connection is working... just not getting Native DSD 1024 thru...
Last 2 jumpers on the U2 are set to "ON"
Any ideas?
Thanks!
JJ
(06-13-2022, 08:27 PM)Joel_1297 提到: II2S connection is working... just not getting Native DSD 1024 thru...
Last 2 jumpers on the U2 are set to "ON"
Any ideas?
Thanks!
JJ
What port definition should I use?
RE: Singxter u2 with Matrix Element X - - Wei Cao - 06-14-2022
Hi JJ
The element X does not support DSD 1024.
RE: Singxter u2 with Matrix Element X - - Joel_1297 - 06-14-2022
(06-14-2022, 05:11 AM)Wei Cao 提到: Hi JJHMMM
The element X does not support DSD 1024.
I thought is did support thru II2 S connection? At least that is what is posted.
I have the Singxer U2.. which can output in native dad 1024
Do i use A or B ?
You have the jumper config on the Singxer u2 for the Element X ? ( i currently have last 2 "on"
Thanks
JJ
RE: Singxter u2 with Matrix Element X - - Wei Cao - 06-15-2022
There are 4 pin definitions to compatible with IIS output devices. You may need to compare the pin definition disgram of element X with the one of Singxer U2.
Please find the definition diagram of element X in page 17 of the manual.
https://www.matrix-digi.com/pdf/element_X_Manual_EN.pdf
RE: Singxter u2 with Matrix Element X - - Joel_1297 - 10-13-2023
Hello, Not sure where else to put this..
Wei, my Element X keeps losing connection with wireless internet.. have to plug out and back in , to reconnect... any recommendations?
(06-14-2022, 06:40 AM)Joel_1297 提到:(06-14-2022, 05:11 AM)Wei Cao 提到: Hi JJHMMM
The element X does not support DSD 1024.
I thought is did support thru II2 S connection? At least that is what is posted.
I have the Singxer U2.. which can output in native dad 1024
Do i use A or B ?
You have the jumper config on the Singxer u2 for the Element X ? ( i currently have last 2 "on"
Thanks
JJ
Hello, Not sure where else to put this..
Wei, my Element X keeps losing connection with wireless internet.. have to plug out and back in , to reconnect... any recommendations?