XSPDIF-2 not recognizing my XSP DAC - 可打印的版本 +- Matrix Audio Community (https://www.matrix-digi.com/forums) +-- 版块: Main Discussion(主讨论区) (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1) +--- 版块: English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4) +--- 主题: XSPDIF-2 not recognizing my XSP DAC (/showthread.php?tid=287) |
XSPDIF-2 not recognizing my XSP DAC - Jonathan_1934 - 05-06-2022 I have an XSPDIF-2 and I cannot get my XSP MQA to recognize it, whether it be through I2S, Coax, AES, etc. I have the drivers and I'm using windows 10 and when I plug in the XSPDIF2, my computer recognizes it and the matrix driver app shows the XSPDIF2. Furthermore, the light on the XSPDIF2 is green. However, I can't get my Matrix X-Sabre Pro MQA to connect to it. My DAC just keeps trying to connect but never does. when I use USB from my XSP to my computer, it works fine but for some reason the XSPDIF isn't working. Does anyone have any clue what is happening here? RE: XSPDIF-2 not recognizing my XSP DAC - Jonathan_1934 - 05-08-2022 Is anyone able to comment on what is going on? I'd like to see if there is a fix before I resort to sending it in. RE: XSPDIF-2 not recognizing my XSP DAC - Wei Cao - 05-10-2022 When you connect the X-SPDIF 2 to your computer, is there red light come out from the optical output port? Do you have some other S/PDIF output devices to test? For example a CD player or TV with optical / coaxial outputs. RE: XSPDIF-2 not recognizing my XSP DAC - Jonathan_1934 - 05-10-2022 I have not tried SPDIF. I have tried with multiple DAC's. Nothing is output. Regardless, I don't think it's normal for any of the other outputs to not be working. RE: XSPDIF-2 not recognizing my XSP DAC - Wei Cao - 05-10-2022 Did you noticed is there red light come out from the optical port of X-SPDIF 2 (when you connect it to a computer)? RE: XSPDIF-2 not recognizing my XSP DAC - Jonathan_1934 - 05-10-2022 No red light coming out of the optical port when connected to any computer. RE: XSPDIF-2 not recognizing my XSP DAC - Wei Cao - 05-13-2022 Hi Jonathan, Your X-SPDIF 2 most likely defective now. Before we talk about what to do next, I hope you can do more test to confirm. Connect it to your PC over USB, play a PCM 44.1kHz music file in foobar2000. In this case, if there is no red light come out from the optical port, we can confirm the X-SPDIF 2 is defective. We must confirm the input sampling rate of the PCM signal is not higher than 192kHz, you can verify the sampling rate by your X-SABRE Pro. Because sampling rate higher than 192kHz also causes the optical port not output. RE: XSPDIF-2 not recognizing my XSP DAC - Jonathan_1934 - 05-14-2022 I tested it, no light out of the optical port. What can I do to get this fixed? |