Firmware - 可打印的版本 +- Matrix Audio Community (https://www.matrix-digi.com/forums) +-- 版块: Main Discussion(主讨论区) (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1) +--- 版块: English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4) +--- 主题: Firmware (/showthread.php?tid=248) |
Firmware - Roberto_194 - 02-27-2022 Hi, i want to know if there is some link to verify and download the last firmware of old products like matrix mini i pro 2. Greetings RE: Firmware - Wei Cao - 02-28-2022 Hi Roberto, As I know, we have not released any firmware update for Matrix mini-i Pro 2. Are you facing some problems about your mini-i Pro 2? Can I help you? Best regards. Wei. RE: Firmware - Roberto_194 - 02-28-2022 (02-28-2022, 01:45 AM)Wei Cao 提到: Hi Roberto,Hi Wei Cao, Thanks for the response. I m trying to verify some things because, since i bought the DAC, i have had problems to play native DSD files. The screen show me PCM 44, 88, 182 when i play DSD files but, i' m really not shure if the problem is the dac, the software Volumio or the raspberry 3pi that i´m using. Greetings. Roberto. RE: Firmware - Wei Cao - 03-04-2022 Hi Roberto, If you would like to verify if your mini-i Pro 2 process DSD files in DSD Native method, you can connect the DAC to a PC over USB, use Foobar2000 (with ASIO and SACD components) and Matrix ASIO Driver. Please refer to the instructions below: https://www.matrix-digi.com/pdf/DSD_Configuration_Guide_v.201805.pdf Click the link below to install driver for Windows: https://www.matrix-digi.com/drivers/Matrix_Audio_All_Driver.zip I'm not sure if Volumio could output native DSD over USB port. RE: Firmware - Roberto_194 - 03-07-2022 (03-04-2022, 05:45 AM)Wei Cao 提到: Hi Roberto, Hi again Wei Cao, finally the problem wasn't the matrix. Volumio had some compatibility problems with some DACs, I really don't understand so well but the problem now is fixed with the las update, now i can see asio native on the dac with no problems. Thanks!! RE: Firmware (mini i2 DLL) - Jeremy_2440 - 02-22-2023 Hi, I hope you can help I have bought a used mini-i pro 2 which looks great. After downloading the drivers I get a message from the Matrix Audio Control Panel "The driver DLL required to access the device is missing" I use an HP Laptop running Windows 10. Can you help and advise please RE: Firmware (mini i2 DLL) - Wei Cao - 02-23-2023 (02-22-2023, 03:03 PM)Jeremy_2440 提到: Hi, I hope you can help Hi Jeremy, Did you downloaded the latest driver software from Matrix website? The driver is compatible with Windows 10. Can you try again? By the way, don't plug the mini-i Pro 2 to your PC before the driver is completely installed. https://www.matrix-digi.com/drivers/Matrix_Audio_All_Driver.zip RE: Firmware (mini i2 DLL) - Jeremy_2440 - 02-23-2023 (02-23-2023, 01:36 AM)Wei Cao 提到:(02-22-2023, 03:03 PM)Jeremy_2440 提到: Hi, I hope you can help RE: Firmware (mini i2 DLL) - Wei Cao - 02-24-2023 (02-23-2023, 01:15 PM)Jeremy_2440 提到: Hi, Thanks for your update. |