Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro.

Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - 可打印的版本

+- Matrix Audio Community (https://www.matrix-digi.com/forums)
+-- 版块： Main Discussion（主讨论区） (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1)
+--- 版块： English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4)
+--- 主题： Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. (/showthread.php?tid=14)

页: 1 2

Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - leaves - 02-13-2020

I will post the details in a new thread.

Click noise occurs when switching the sampling rate when using with PC → USB → X-SPDIF 2 → I2S → X-Sabre Pro, MCLK ON and 128fs synchronous mode.
It does not occur at 44.1 and 48kHz. Click noise occurs when switching from 44.1 and 48kHz to 96kHz or more, or switching from 96kHz or more to 44.1 and 48kHz.
It does not occur in asynchronous mode.

The sound is overwhelmingly good in sync mode, so it would be very appreciated if improved.

I forgot to write it, but I am using XLR from X-Sabre Pro to connect to a headphone amplifier and listening with headphones.
So the click noise sounds loud and I am worried about the headphones and ears.

RE: Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - Wei Cao - 02-13-2020

Hi Leaves,
our technical guy is trying to reproduce the pop noise you mentioned.
Please wait.

Thank you.

RE: Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - leaves - 03-03-2020

Hi,
Did you reproduce the noise?
Are there any plans to fix it in the future?

Thank you.

RE: Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - Wei Cao - 03-03-2020

Sorry to let you wait so long time, today we began to work at office. we were work at home before today because the epidemics.
I will let you know the situation once i get some further information.

RE: Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - leaves - 09-05-2020

Hi,
I'll ask you again, can you just tell me if there are any plans to fix it?
Sound quality is the highest priority, so if you make a correction and it can cause sound quality degradation, you don't need to fix it.

Thank you.

RE: Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - Radoslav - 05-25-2023

Hello.
I have exactly the same issue with exactly the same environment as @leaves.
Static pop sound at the beginning of track when switching to another sampling rate. Only in sync mode. The same with X-Spdif 2 and X-Spdif 3. The same on all X-Sabre pro filters. The same with different I2S hdmi cables.
Any workaround @Wei Cao?

My chain: USB to Matrix X-Spdif 3, I2S to X-Sabre Pro (non MQA version).
X-Sabre pro settings: sync mode ON, jitter reducer OFF, Dither: ON
X-Spdif 2 / X-Spdof 3 settings:
DoP to Native OFF, IIS reverse OFF, MCLK ON (mode B).

By the way, the sound is great.

RE: Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - Wei Cao - 05-26-2023

Hi both,
Yes, at sync mode, the poping noises happens when the sampling rate changes.

RE: Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - Phillip - 09-24-2023

(05-26-2023, 06:05 AM)Wei Cao 提到: Hi both,
Yes, at sync mode, the poping noises happens when the sampling rate changes.

Hi, is there a fix for this problem? I have the same problem with my XSP MQA.

RE: Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - Wei Cao - 09-25-2023

(09-24-2023, 11:05 PM)Phillip 提到: Hi, is there a fix for this problem? I have the same problem with my XSP MQA.

Hi Phillip,
Is this issue happen when the X-SABRE Pro MQA is at Sync mode?

RE: Click noise occurs when using an I2S connection with X-SPDIF 2 + X-Sabre Pro. - Phillip - 09-29-2023

(09-25-2023, 03:32 AM)Wei Cao 提到:
(09-24-2023, 11:05 PM)Phillip 提到: Hi, is there a fix for this problem? I have the same problem with my XSP MQA.
Hi Phillip,
Is this issue happen when the X-SABRE Pro MQA is at Sync mode?

Hi Wei Cao, yes this issue happens when the X-SABRE Pro MQA is at Sync mode. No problem when in Async mode, however that diminishes the benefit of the X-SPDIF 2.