Collecting bugs of mini-i 3 series products - 可打印的版本 +- Matrix Audio Community (https://www.matrix-digi.com/forums) +-- 版块: Main Discussion(主讨论区) (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1) +--- 版块: English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4) +--- 主题: Collecting bugs of mini-i 3 series products (/showthread.php?tid=130) |
RE: Collecting bugs of mini-i 3 series products - jordan - 12-04-2021 (11-30-2021, 06:31 AM)Cao Wei 提到:(11-26-2021, 05:22 AM)jordan 提到: Yes, this is a recent problem, Airplay was working before. I have a Sony Android TV that still works fine to receive Airplay.Hi Jordan, THANK YOU for working with me to resolve the issue. It's working perfectly now. RE: Collecting bugs of mini-i 3 series products - FERNANDO_1628 - 12-05-2021 Hi, it is a USB-A to USB-C. Yesteraday, after a restart appeared in the menu of MiDi Configuration. Thanks anyway Fernando RE: Collecting bugs of mini-i 3 series products - Mark_1682 - 12-22-2021 Hello, recently purchased a mini-i 3 pro and have had issues booting up. I get stuck in a boot up loop. Left it alone for an hour; it never progressed. Disconnected it for a while and re-attempted; same result. A quick video showing the loop: https://imgur.com/a/8nco8m2 Any potential solution or is this likely a DoA? RE: Collecting bugs of mini-i 3 series products - Wei Cao - 12-26-2021 Hi Mark, Which country are you living in? How much volts is your power supply? Can you check the power voltage setting of your unit? You can find the power voltage switch on the side of the enclosure. Best regards. RE: Collecting bugs of mini-i 3 series products - Mark_1682 - 12-28-2021 (12-26-2021, 02:54 AM)Cao Wei 提到: Hi Mark, Hello, In the USA and purchased the device from Apos. It seems the volts setting on the device is 230V. I'm not positive what you mean by my power supply. I've tried it in a couple of different outlets in my home with the same result (it's a new apartment complex if that's helpful) RE: Collecting bugs of mini-i 3 series products - Mark_1682 - 12-29-2021 Ah, did not realize that the voltage shown on the side is an actual switch. Changed it to 115V and have it working now! RE: Collecting bugs of mini-i 3 series products - Steven_1236 - 01-04-2022 Hi - I've started having an issue with my Mini-i-3. It seems to go into some sort of deep standby mode and neither the remote control or any of the front panel buttons will wake it up. I need to pull the power cord to reboot it before it is useable again. I've noticed that when it is in this state, Roon no longer sees it as an available player and cannot wake it up to play. The device is on the latest firmware, C813A8. Any ideas? RE: Collecting bugs of mini-i 3 series products - Roberto_1702 - 01-06-2022 (01-04-2022, 12:21 PM)Steven_1236 提到: Hi - I've started having an issue with my Mini-i-3. It seems to go into some sort of deep standby mode and neither the remote control or any of the front panel buttons will wake it up. I need to pull the power cord to reboot it before it is useable again. Same!!! please help... RE: Collecting bugs of mini-i 3 series products - Patrick_1562 - 01-06-2022 (11-26-2021, 04:58 AM)Cao Wei 提到:(11-10-2021, 06:44 PM)Brendan_1587 提到:(11-04-2021, 03:59 PM)Patrick_1562 提到: Hello - Hello - sorry for the slow reply. The issue does not happen very frequently, but it did just happen. This time, I was listening on my mac mini m1 <-> usb. I started playing Roon to the i3. At that time the i3 device disappeared from Roon as though it went offline. When I went to use the controls on the i3 it was locked up. I was unable to attach a video, but here is a photo. If i turn the dial or press the dial nothing happens on screen. RE: Collecting bugs of mini-i 3 series products - Roberto_1702 - 01-06-2022 I bought it 7 days ago. I turn on the mini and after a while it freezes. It does not respond to the commands. I send with the remote control and neither do the physical buttons on the same device respond. I can't even turn off the device. To do so, I have been forced to unplug the power cord. I checked the firmware version and it is working wit the latest version...I'm disappointed. |