+- Matrix Audio Community (https://www.matrix-digi.com/forums)
+-- 版块： Main Discussion（主讨论区） (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1)
+--- 版块： English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4)
+--- 主题： Collecting bugs of mini-i 3 series products (/showthread.php?tid=130)
RE: Collecting bugs of mini-i 3 series products - Wei Cao - 03-21-2023
(03-03-2023, 02:36 PM)William _2454 提到: Issue 2: When using Tidal over USB, it wont recognize any MQA tracks for decoding, it just says PCM. Please Advise
Please follow the steps:
1. enter settings of mini-i Pro 3.
[attachment=289]
2. enable exclusive mode and force volume.
[attachment=290]
RE: Collecting bugs of mini-i 3 series products - Jakub - 03-29-2023
Hello,
I have a problem with matrix mini-i 3 pro. It stuck in headphones mode, even when headphones are disconnected. I'm using balanced 4,4 mm output.
Maybe anyone had a similar problem or does anyone know how to help? Is it possible to change the output in the device settings?
Thanks.
RE: Collecting bugs of mini-i 3 series products - Igor_3357 - 02-02-2024
Hello! I have a problem just like these guys. What do you recommend?
Alejandro
Junior Member
Posts: 7
Threads: 1
Joined: Feb 2024
Reputation: 1
#1
12-11-2020, 08:47 PM
I'm from Chile, South American. I just bought a mini-i pro 3, but I am quite disappointed as I have been testing the equipment for a few hours and I am constantly experiencing problems with it.
I turn on the DAC and after a while it freezes. It does not respond to the commands I send with the remote control and neither do the physical buttons on the same device respond. I can't even turn off the device. To do so, I have been forced to unplug the power cord. I checked the firmware version and it appears that it is working with version C313B6.
The problem repeats itself every time and every time I turn it on and use it.
What could be the problem and the solution?
Steven_1236
Junior Member
Posts: 3
Threads: 0
Joined: Feb 2024
Reputation: 1
#37
01-04-2022, 12:21 PM
Hi - I've started having an issue with my Mini-i-3. It seems to go into some sort of deep standby mode and neither the remote control or any of the front panel buttons will wake it up. I need to pull the power cord to reboot it before it is useable again.
RE: Collecting bugs of mini-i 3 series products - Wei Cao - 02-05-2024
(02-02-2024, 09:50 AM)Igor_3357 提到: Hello! I have a problem just like these guys. What do you recommend?Hi Igor, I've contacted you by PM.
Alejandro
Junior Member