+- Matrix Audio Community (https://www.matrix-digi.com/forums)
+-- 版块： Main Discussion（主讨论区） (https://www.matrix-digi.com/forums/forumdisplay.php?fid=1)
+--- 版块： English Discussion (https://www.matrix-digi.com/forums/forumdisplay.php?fid=4)
+--- 主题： Feature Request: better response for volume contron on Mini I Pro3 (/showthread.php?tid=126)
Feature Request: better response for volume contron on Mini I Pro3 - Goran - 04-18-2021
I'm a fresh user of Mini I Pro3, I'm really enjoying it, but I feel volume control could be better. There are two problems:
1. When changed, the first movement is ignored; it's used to get from the default screen to volume control screen and then only the second movement is registered as volume change by 0.5dB.
2. Volume change is too linear and feels sluggish when attempted to quickly turn the volume up or down. For example, when I slowly rotate by 90 degrees, it's 6 clicks and the volume changes by 6x0.5dB, which is ok. But if I rotate quickly, it changes typically by 3 or 4 times 0.5dB, while I would expect to change even more, for example, double, 12x0.5dB.
RE: Feature Request: better response for volume contron on Mini I Pro3 - Wei Cao - 04-19-2021
Got your suggestions. I have reported your idea to our bug/request report system.
Thanks you!
RE: Feature Request: better response for volume contron on Mini I Pro3 - Rolf - 04-23-2021
(04-18-2021, 08:17 PM)Goran 提到: I'm a fresh user of Mini I Pro3, I'm really enjoying it, but I feel volume control could be better. There are two problems:+1 !
1. When changed, the first movement is ignored; it's used to get from the default screen to volume control screen and then only the second movement is registered as volume change by 0.5dB.
2. Volume change is too linear and feels sluggish when attempted to quickly turn the volume up or down. For example, when I slowly rotate by 90 degrees, it's 6 clicks and the volume changes by 6x0.5dB, which is ok. But if I rotate quickly, it changes typically by 3 or 4 times 0.5dB, while I would expect to change even more, for example, double, 12x0.5dB.
RE: Feature Request: better response for volume contron on Mini I Pro3 - Zest - 04-30-2021
(04-19-2021, 06:37 AM)Cao Wei 提到: Got your suggestions. I have reported your idea to our bug/request report system.
Thanks you!
Yes, volume acceleration support when you turn the dial fast is sorely needed, and I don't think it is difficult to implement. Even Amir from AudioScienceReview complained about the very slow changing volume control.
Hope we can see this feature added very soon
RE: Feature Request: better response for volume contron on Mini I Pro3 - Louis - 05-15-2021
Yep, Amir and most reviewers complained about the volume control slowness...
I second this: This volume control really does need acceleration. I was not sure if it could be hardware limited or something. Bu when used with Roon Ready, the volume control from Roon software is blazing fast on the other hand. So I would suppose that Mini-i 3 could support some acceleration by firmware update.
The same acceleration should also be supported with the remote, by the way.
Best regards.
VintageFlanker.
RE: Feature Request: better response for volume contron on Mini I Pro3 - Wei Cao - 05-21-2021
Got your information. Thank you.